Pressure Calibrator 718

Measuring Pressure (internal sensor)
Accuracy 0.025% of full scale
Functions Zero, Min/Max, Hold and Damping
Dry air, but not corrosive
Fluke 718 1G
Range -1 psi to +1 psi, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa)
Resolution 0.0001 psi, 0.001 mbar, 0.0001 kPa
Overpressure 5 x full scale
Functions Zero, Min, Max, Hold and Attenuation
Fluke 718 30G
Range -12 to 30 psi (-850 mbar to 2 bar, -85 to 206.84 kPa)
Resolution 0.001 psi, 0.1 mbar, 0.01 kPa
Overpressure 5 x full scale
Functions Zero, Min, Max, Hold and Attenuation
Fluke 718 100G
Range -12 to 100 psi (-850 mbar to 7 bar, -85 to 689.48 kPa)
Resolution 0.01 psi, 0.1 mbar, 0.01 kPa
Overpressure 2 x full scale
Functions Zero, Min, Max, Hold and Attenuation
Fluke 718 300G
Range -12 to 300 psi (-850 mbar to 20 bar, -85 to 2068.42 kPa)
Resolution 0.01 psi, 1 mbar, 0.1 kPa
Overpressure 375 psi, 25 bar
Functions Zero, Min, Max, Hold and Attenuation
Fluke 718 Series when using 700 Series Print Modules
Range 29 pressure modules, 0 – 1 inch water column up to 10,000 psi, 2.5 mbar to 700 bar. Overpressure according to print module specifications
Resolution According to print module specification
Accuracy Up to 0.025% of full scale, according to print module specifications
Functions Zero, Min, Max, Hold and Attenuation
Media Compatibility to Print Module Specifications
Fluke Series 718 when using the integrated pump
Range -12 psi or -850 mbar to full scale Supported pressure units: psi, inches water column (4°C), inches water column (20°C), cm water column (4°C), cm water column (20°C), bar, mbar, kPa, inches mercury column, mm mercury column, kg/cm
Loop current 24 V DC
Accuracy ± 10%
Burden; 20 mA at 1000 Ω for > 6.8 V battery; 700 Ω for 5.8 to 6.8 V battery
mA measurand
Range 0 mA to 24 mA
Resolution 0.001 mA
Accuracy 0.015% + 1 digit
General technical data
Maximum permissible voltage 30 volts (when stored)
Temperature -40 °C to 60 °C
Operating temperature -10 °C to 55 °C
Relative humidity 95% (10°C to 30°C); 75% (30°C to 40°C); 45% (40°C to 50°C); 35% (50°C to 55°C)
Altitude above sea level during operation Max. 3,000 m
Push Drop test from a height of 1 meter
Vibration Measuring Instruments Random noise, 2 g, 5 Hz to 500 Hz
Safety CSA C22.2 No. 1010.1: 1992
EMC EN50082-1: 1992 and EN55022: 1994 Class B
Dimensions 216 x 94 x 66 mm (8.50 x 3.72 x 2.60 inches)
Weight 992 g (35 oz)
Power supply, battery life 9V ANSI/NEDA 1604A or IEC 6LR61 9V alkaline battery, two batteries on the 718
Life 4 to 20 hours typical, depending on the functions used
Warranty Three years (one year on the pressure pump in the Fluke 718)
Display LCD, 5 digits, print and power at the same time