CONTACTOR 100-K12*10

Number of normally open contacts as main contact 3
Number of auxiliary contacts as normally open contact 1
Vibration resistance IEC 60068-2
Shock resistance IEC 60068-2
Altitude, max 2000 m (NN) per IEC 60947-4
Lifespan Mechanical DC control: 15000000 ops
Switching frequency, max 250 ops/h, AC-4 (approximately 200000 operations)
Recommended torque 10.6 lb.in
Weight DC: 0.2 kg
Conductor cross section Main contact, 2 conductor: 1…2.5 mm^2 + 1…4 mm^2
Protection class IP2X
Electrical
Voltage type for actuating AC
Rated control supply voltage at AC 50 Hz 110 V
Rated control supply voltage at AC 60 Hz 120 V
Rated control supply voltage at DC 0 V
Type of electrical connection of main circuit Screw connection
Rated impulse withstand voltage (Uimp) 6 kV
Optional overload relays Bimetallic
Main current circuit resistance 2.2 mOhm
Power dissipation (all circuits) 0.9 W @ 400V, AC-3, Ie
Rated filament current 9 A @ 230/240V, AC-5b
Rated isolation voltage (Ui) IEC: 690V, UL, CSA: 600V
Switching of motor load 11 A @ 400V, AC-7b (50 Hz)
Packaging Single pack (quantity of 1)
Auxiliary contacts IP2X
Rated current (enclosed) 9.6 A @ 230V, 3-phase per UL/CSA
Rated power (enclosed) 7.5 Hp @ 575V, 3-phase per UL/CSA
Auxiliary contact configuration 1 NO
Capacitance, max 750 µF @ short-circuit current of 10 kA
General purpose current (enclosed) 18 A per UL/CSA
Operating time, closing delay 6…12 ms DC (conventional)
Switching of low inductive loads 20 A @ 400V, AC-7a per IEC 61095 (50 Hz)
Short time withstand (Icw) 96 A for 10 s, 60 °C
Operating time, opening delay 8…12 ms with integrated diode
Coil consumption, hold-in Cold 3.0 W, warm 2.6 W DC (conventional)
Coil consumption, pick-up Cold 3.0 W, warm 2.6 W DC (conventional)
Total power dissipation DC control: 3.5 W @ 400V, AC-3, Ie
Operating limits, dropout (0.2…0.75) x Us @ 50 Hz, 60 Hz, 50/60 Hz
Switching of lamps Gas discharge lamps, open: 18 A @ 40 °C, AC-5a
Insulation class of the coil Class F per IEC 60085, Class 105 insulation system per UL 508
Rating for switching AC motors 3-poles: 7-1/2 Hp @ 575V (AC-2, AC-3, AC-4), 3-phase (60 Hz)
Switching of hermetically sealed cooling compressor motors 18 A @ 400V, AC-8a (manual reset of overload release (50 Hz))
Operating limits, pick-up (0.85…1.1) x Us @ 50 Hz, 60 Hz, 50/60 Hz
UL class K5 and RK5 fuses rating 40 A @ 600V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14
DIN fuses (gG, gL) current rating Type 2 (per IEC 60947-4-1): 20 A @ 400 V, 50 kA available fault current
Rated operational current (Ie) 9.2 A @ 500V, AC-4 (50 Hz), ambient temperature 60 °C
UL class J and CSA HRCI-J fuses rating 30 A @ 600V, 50 kA available fault current per UL 508 and CSA 22.2 No. 14
Switching of power transformers Apparent power: 5 kVA @ 500V, AC-6a, 50 Hz (n = 30)
Rated operational power (Pe) 8.3 kW @ 240V, AC-1 (50 Hz), ambient temperature 40 °C
Switching of DC loads 3-poles in series: 9 A @ 48/60V (Non-inductive or slightly inductive loads or resistance furnaces DC-1 at 60 °C)
Optional accessories Front-mount auxiliary contacts, surge suppressors, electronic timers, mechanical interlocks
Features Mini-contactors, Uniform panel mounting dimensions, Panel mounting or mounting on 35 mm DIN Rail, Made of environmentally friendly materials
UL class CC and CSA HRCI-MISC fuses rating 30 A @ 600V, 50 kA available fault current per UL 508 and CSA 22.2 No. 14