| WLAN Interface |
| WLAN Standards |
- 802.11a/b/g/n
802.11i Wireless Security
|
| Modulation Type |
|
| Frequency Band for EU (20 MHz operating channels) |
- 2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320
GHz (4 channels)
DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
5.500 to 5.700 GHz (11 channels)
DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
|
| Wireless Security |
- WEP encryption (64-bit and 128-bit)
WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP,
AES)
WPA/WPA2-Personal
|
| Transmission Rate |
- 802.11b: 1 to 11 Mbps
802.11a/g: 6 to 54 Mbps
802.11n: 6.5 to 300 Mbps
|
| Transmitter Power for 802.11a |
- 23±1.5 dBm @ 6 to 24 Mbps
21±1.5 dBm @ 36 Mbps
20±1.5 dBm @ 48 Mbps
18±1.5
dBm @ 54 Mbps
|
| Transmitter Power for 802.11n (5 GHz) |
- 23±1.5 dBm @ MCS0/8 20 MHz
18±1.5 dBm @ MCS7/15 20 MHz
23±1.5 dBm @ MCS0/8 40
MHz
17±1.5 dBm @ MCS7/15 40 MHz
|
| Transmitter Power for 802.11b |
- 26±1.5 dBm @ 1 Mbps
26±1.5 dBm @ 2 Mbps
26±1.5 dBm @ 5.5 Mbps
25±1.5 dBm @
11 Mbps
|
| Transmitter Power for 802.11g |
- 23±1.5 dBm @ 6 to 24 Mbps
21±1.5 dBm @ 36 Mbps
19±1.5 dBm @ 48 Mbps
18±1.5
dBm @ 54 Mbps
|
| Transmitter Power for 802.11n (2.4 GHz) |
- 23±1.5 dBm @ MCS0/8 20 MHz
18±1.5 dBm @ MCS7/15 20 MHz
23±1.5 dBm @ MCS0/8 40
MHz
17±1.5 dBm @ MCS7/15 40 MHz
|
| Receiver Sensitivity for 802.11a (measured at 5.680 GHz) |
- Typ. -90 @ 6 Mbps
Typ. -88 @ 9 Mbps
Typ. -88 @ 12 Mbps
Typ. -85 @ 18
Mbps
Typ. -81 @ 24 Mbps
Typ. -78 @ 36 Mbps
Typ. -74 @ 48 Mbps
Typ. -72 @
54 Mbps
Note: Due to a limitation in the receiver sensitivity performance for
channels 153 and 161, it is recommended to avoid using these channels in your critical
applications.
|
| Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz) |
- Typ. -69 dBm @ MCS7 20 MHz
Typ. -71 dBm @ MCS15 20 MHz
Typ. -63 dBm @ MCS7 40
MHz
Typ. -68 dBm @ MCS15 40 MHz
Note: Due to a limitation in the receiver
sensitivity performance for channels 153 and 161, it is recommended to avoid using these
channels in your critical applications.
|
| Receiver Sensitivity for 802.11b (measured at 2.437 GHz) |
- Typ. -93 dBm @ 1 Mbps
Typ. -93 dBm @ 2 Mbps
Typ. -93 dBm @ 5.5 Mbps
Typ. -88
dBm @ 11 Mbps
|
| Receiver Sensitivity for 802.11g (measured at 2.437 GHz) |
- Typ. -88 dBm @ 6 Mbps
Typ. -86 dBm @ 9 Mbps
Typ. -85 dBm @ 12 Mbps
Typ. -85
dBm @ 18 Mbps
Typ. -85 dBm @ 24 Mbps
Typ. -82 dBm @ 36 Mbps
Typ. -78 dBm @
48 Mbps
Typ. -74 dBm @ 54 Mbps
|
| Receiver Sensitivity for 802.11g (measured at 2.437 GHz) |
- Typ. -70 dBm @ MCS7 20 MHz
Typ. -69 dBm @ MCS15 20 MHz
Typ. -67 dBm @ MCS7 40
MHz
Typ. -67 dBm @ MCS15 40 MHz
|
| WLAN Operation Mode |
-
Access point, Client, Client-Router, Master, Slave, Sniffer
|
| Antenna |
-
External, 2/2 dBi, Omni-directional
|
| Antenna Connectors |
|
|
| Ethernet Interface |
| Standards |
- IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3at for PoE
IEEE 802.1Q for VLAN Tagging
IEEE 802.1X for authentication
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
|
| PoE Ports (10/100/1000BaseT(X), RJ45 connector) |
1
|
|
| Ethernet Software Features |
| Management |
DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search Utility, MXview, MXview Wireless, MXconfig
|
| Routing |
Port forwarding, Static Route, NAT
|
| Redundancy Protocols |
RSTP, STP
|
| Security |
HTTPS/SSL, RADIUS, SSH
|
| Time Management |
SNTP Client
|
|
| Firewall |
| Filter |
-
ICMP, MAC address, IP protocol, Port-based
|
|
| Serial Interface |
|
| LED Interface |
| LED Indicators |
-
PWR1, PWR2, PoE, FAULT, STATE, SIGNAL, WLAN, LAN
|
|
| Input/Output Interface |
| Digital Inputs |
- 2
Max. input current: 8 mA
+13 to +30 V for state 1
+3 to -30 V for state 0
|
| Alarm Contact Channels |
Relay output with current carrying capacity of 1 A @ 24 VDC
|
| Buttons |
Reset button
|
|
| Physical Characteristics |
| Housing |
Metal
|
| IP Rating |
IP30
|
| Dimensions
|
52.7 x 135 x 105 mm (2.08 x 5.32 x 4.13 in)
|
| Weight |
860 g (1.9 lb)
|
| Installation |
- DIN-rail mounting (with optional kit)
Wall mounting
|
|
| Power Parameters |
| Input Current |
-
0.6 A @ 12 VDC, 0.15 A @ 48 VDC
|
| Input Voltage |
-
12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet
|
| Power Connector
|
1 removable 10-contact terminal block(s)
|
|
Power Consumption
|
7.2 W (max.)
|
|
Reverse Polarity Protection
|
Supported
|
|
| Environmental Limits |
| Operating Temperature |
-
-40 to 75°C (-40 to 167°F)
|
| Storage Temperature (package included) |
-
-40 to 85°C (-40 to 185°F)
|
| Ambient Relative Humidity |
5 to 95% (non-condensing)
|
|
| Standards and Certifications |
| Safety |
|
| EMC |
|
| EMI |
CISPR 32, FCC Part 15B Class A
|
| EMS |
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8 PFMF
|
| Hazardous Locations |
- ATEX
Class I Division 2
IECEx
|
| Radio |
EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-WAPN008, ANATEL, MIC, NCC, RCM, SRRC, WPC, KC
|
| Vibration |
|
|
| MTBF |
| Time |
570,854 hrs
|
| Standards |
Telcordia SR332
|
|
| Warranty |
| Warranty Period |
5 years
|
| Details |
|
|
نقد و بررسیها
هنوز بررسیای ثبت نشده است.